A06B-6055-H203

A06B-6055-H203 ¦ SP-3 EXT.FIN

Fanuc A06B-6055-H203 AC spindle unit. This low powered AC spindle drive is a model SP-3 digital drive with external heatsink. Available exchange or surplus stock permitting. Currently we only have stock of exchange 3kW with external fin (heatsink).

Other than very large AC spindle drive units, this was the last of the anodized metal frames spindle servo units. This particular drive is rated at 3kW and would power a comparatively rated AC spindle motor. Controlled from either a digital 0-A, 0-B or early 16 bit 0-C or early 15, 16, 18 controls.

Similar to all the metal frame spindles; the power section was hardwired. Fitted a top with AC spindle control board A20B-1001-0120 available separate. Further we also supply transistor modules and fuses for these drives.

The A06B-6055-H203 price is based on the service you require. Our most popular is service exchange; in which we supply you a fully refurbed unit, tested with warranty on a swap basis for your faulty module in complete, economically repairable and non interfered with condition.

Alternatively we offer extensive testing and repair facilities offering a cheaper option to exchange. Lastly if stocks permit then outright sale of refurbished or new AC spindle servo unit.

Note: We only supply the generic drive; this is the base model without the software (eproms or NVram). If we supply exchange or surplus then you would remove from your faulty drive and transfer across ~ we do provide instructions. Hence you will see part numbers with # suffix i.e: A06B6055H203#H500, A06B6055H203#H512, etc.

All of the A06B-6055-H203 AC spindle servo are tested on our series 0 generation control series and largest AC servo motors applicable. If you are unsure if your 3kW spindle drive is indeed faulty then check our alarm page for AC spindle drive alarms.

Purchase surplus online when available or contact us on +1(434)971-1394 or email to order or for prices, stock and more information.