A06B-6078-H206 Fanuc Spindle Module SPM-5.5 I ¦ CNC

A06B-6078-H206 ¦ SPM-5.5 Type 1

Fanuc A06B-6078-H206 in stock. ALPHA SPM-5.5 spindle amplifier module is available on exchange basis for immediate shipping. This amplifier uses the type 1 interface (simpliest of the two interface types). Being a model 5.5 rated output of 6.8kW normally found driving model a6, aP8 or high speed AC spindle motor with standard ALPHA sensor feedback.

The drive has the folloing internal boards; power pcb A16B-2202-047x and control cards A16B-2202-043x or A16B-2203-033x with 9D00 or 9D0A software. None of the boards are available seperately; as a result we only supply the complete H206 amplifier. However we do supply transistor modules, fuses, battery packs and fans when stocks permit.

Please note these SPM-5.5 (Type 1) have a #H50x suffix which denote different software: namely #H500, #H501; listed as follows:

A06B-6078-H206#H500
A06B-6078-H206#H501

At 90mm wide this spindle module has only the internal and an external heatsink. There are external cooling fans that can be fitted. The SPM-5.5 drive also has a twin seven segment LED display which illumantes when the drive is powered and shows various states of the amplifier. Please visit our ALPHA spindle module alarms page for the meanings of the alarms, codes, errors listed on your amplifier.

If required A06B-6078-H206 testing and repair services are available. CNC offer all work in house and do not outsource any repairs, or testing off your or any ALPHA SPM-5.5 spindle module outside the group.

In summary for quick delivery of A06B-6078-H206 order service exchange or for a cheaper option then our fast turnaround repair service may suit your needs. At CNC we endeavour to repair modules once the go ahead is given within 24-48 hours. However if you are desperate to get your machine back up and running then exchange is always the fastest route.

A06B-6078-H206

A06B-6078-H206 ¦ SPM-5.5 Type 1

Login