A06B-6088-H122

A06B-6088-H122 ¦ SPM22 (IV) Spindle

Fanuc A06B-6088-H122 spindle amplifier module. CNC stock ALPHA SPM-22 spindle drive available on exchange basis for immediate shipping. This amplifier uses the type 4 interface (supports C axis contour). Being a model 22 rated output of 25.2kW normally found driving model a22, AP40 or high speed AC spindle motor with twin sensor ALPHA sensor feedback.

The drive has the folloing internal boards; power pcb A20B-1006-048x or A20B-1006-0487, firing board A20B-2902-0390 and control card A16B-2202-043x or A16B-2203-033x. None of the boards are available seperately; as a result we only supply the complete H122 amplifier. However we do supply transistor modules, fuses, batteries and fans when stocks permit.

Please note these SPM-22 (Type IV) have a #H50x suffix which denote different software: namely #H500, #H501 and #H508; listed as follows:

• A06B6088H122#H500
• A06B6088H122#H501

Please let us know which versions of this drive as these are incompatible to each other due to added or reduced functionality. At 150mm wide this spindle module has both internal and external cooling fans and an external heatsink.

The drive also has a twin seven segment LED display which illumantes when the drive is powered and shows various states of the amplifier. Please visit our ALPHA spindle module alarms page for the meanings of the alarms, codes, errors listed on your amplifier.

If required full testing and repair services are available. CNC offer all work in house and do not outsource any repairs, or testing off your or any ALPHA SPM-22 (IV) spindle module outside the group.

In summary for quick delivery of A06B-6088-H122 order service exchange or for a cheaper option then our fast turnaround repair service may suit your needs.

At CNC we endeavour to repair modules once the go ahead is given within 24-48 hours. However if you are desperate to get your machine back up and running then exchange is always the fastest route.