A06B-6078-H311

A06B-6078-H311 ¦ SPM-11 II Spindle Module

Fanuc A06B-6078-H311 is in stock NOW. Fanuc alpha spindle exchange, testing and repair with comprehensive test facilities are available on the SPM-11 type-2 interface spindle drive module. The drive is normally fitted with a a8 AC spindle motor, though variations exist with sensor feedback for the type-2 interface.

If required full testing of the A06B6078H311 or repair services are also available if need be. CNC offer all work in house and do not outsource any repairs to alpha SPM-11 II spindles or testing outside of the group.

Note the variations in software between A06B6078H311#H500 and A06B6078H311#H501; they are not compatible and you must tell us the #H500 or #H501 when ordering.

Pricing for A06B-6078-H311 drive unit is dependent on service offered. Currently on this type two SPM-11 we offer exchange program and testing and repair services. Exchange is the quickest service saving you big on OME and other supplier charges.

The test and repair facility allows a cheaper cost but at the expense of downtime. Our normal repair turnaround times are 24-72 hours dependent on workloads.

All alpha spindle units are tested with Fanuc 0-C or one of our i series controls with the correct spec of AC spindle motor.